If you’re not feeling too happy with the finish on your car, polish can certainly help! As the years roll by, your car’s paint job may suffer at least a few nicks or scratches. By polishing it up regularly, you can hide these quite well and give your vehicle a fresher look.
In addition, polish is also great for removing the oxidation layer you find in old cars.
Polishing is fairly easy too. You don’t have to take your car to a detailing centre every time you need to get it done. Simply follow the instructions and advice below and you’ll be able to do it all by yourself.
Gather the Right Tools
First of all you have to figure out whether you want to do the polishing manually or using a machine. The latter can certainly help you get the job done faster. When looking for the best car polish machine reviews from customers and experts can point you in the right direction. Determine which one fits your budget and is easiest to use.
If you prefer to go at it manually, then you’ll need to purchase a proper polishing pad. Once you’ve purchased either a pad or a machine, you’ll need to get the right compound to suit your needs. Some compounds are more suited for getting rid of the more superficial abrasions but don’t do so well against the deeper marks. Therefore consider well before you make a purchase.
Wash and Dry Your Car
Before you begin polishing, you have to get rid of all the dirt, grime and other contaminants that are stuck to the surface of your car. Otherwise, when you start rubbing in the polish, the contaminants may be grinded into the paint.
The car must also be completely dry in order to achieve the best results. However, don’t leave the car out in the sun to quicken the drying process. This will result in uneven spots on the paint.
Apply the Polish
Now the actual polishing! First you must dampen the pad before you apply compound to it. You can either apply the compound onto the pad itself or the body of the car. Once you’ve done that, direct the polishing machine onto the surface of your car and switch it on.
Move the polish machine back and forth, maintaining a parallel angle to the surface. Be sure to apply a steady pressure while you’re moving the machine. This will ensure that you get an even glossy coat throughout the exterior of the car. However, you may want to apply more pressure to the sites of the scratches.
If you’re doing this manually with a pad, perform the same movement.
Once you’ve applied the compound all over the car’s body, it’s time to wash it once more and dry off. This will get rid of any extra compound that would otherwise stick and remain on the body.
And that’s all there is to polishing a car! Now all that’s left is to stand back and admire your handiwork.