Easily obtainable visas for trade workers, better pay and more than 240 days of sunshine in a year make Australia a great place to be, work and explore!   

Thousands of people arrive in Australia on a working holiday visa, ready to find employment on a temporary basis or for a long term.  And many of those who have a trade qualification find employment successfully within the construction industry. 

The thriving construction trade has led to an acute shortage of carpenters and electricians in the major cities of Australia, resulting in a huge demand for them.

Trade Jobs in Australia

Types of Carpentry Work Available

Some of the carpentry work available in Australia are as follows:

  • Cabinet makers
  • Shop-fitters
  • Joiners
  • Formwork carpenters
  • Carpenters
  • Trades Assistants

Tools Required

Claw hammer, tape measure, utility knife, moisture meter, chisel, level, screwdrivers, nail set, sliding bevel and layout square are some of the basic hand tools a carpenter in Australia uses.  Apart from these, you will require some power tools as well for efficient carpentry work.

Electrician in Australia

You are required to complete a Cert III in Electro-Technology to become an electrician without any previous electrical experience.  This four-year program and on-the-job/off-the-job training will make you a skilled electrician all over Australia, at the successful accomplishment of it.

Tools Required

An electrician’s basic requirement of tools are tool belt, complete screwdriver set, electrician levels, pliers, cable strippers, tape measure, insulated screwdriver set, drill bits, clamp meter, hole saw, circuit breaker finder and power tools such as hammer drills and driver drills.

Requirements for Getting A Trade Job in Australia

Any construction site in Australia will generally require you to meet the following requirements;

1.      White Card

The white card lets the prospective employer know that you have completed the necessary training & assessments.  It shows that you are aware of how to work and act safely in the construction industry. 

2.      Personal Protective Equipment (PPE)

The minimum PPE requirement on any site is usually a hard hat, steel toe cap boots and a hi-vis top.  Other sites require you to also wear gloves and protective eyewear as well as earmuffs or ear plugs if necessary.

3.      Trade Qualification

A copy of your occupation certificate is necessary to prove that you have completed an internship overseas.  You can become a trade assistant, even though you may not be completely familiar as a qualified tradesperson in Australia. 

4.      Tools

Most construction companies require you to have your peculiar gears (ranging from basic hand tools to more expensive power tools) affording to your profession requirement.  Therefore, you need to make sure that you know what are the tools required for the job and where to get it. For example,  Hornibrooks is a good place to search for your tool requirements.

5.      Transport

If you have your own personal transport, it will help your travel to and from any construction sites

6.      The Right Attitude

Working in the construction industry can be physically challenging and requires long hours from time to time.  As such, you need to be prepared for hard work and long days.  Meeting these demands with the right attitude will get you through.

Comments are closed.